How to Repair Wi-Fi Issues After Upgrading to the Windows 10 Creators Update?

Fix No Wi-Fi

No Wi-Fi issue is as common as “No Audio after upgrading to Windows 10 creators update” problem.

In my previous blog, I’ve discussed the audio driver incompatibility and tried to solve the audio problem with the help of some fixes.

Same as that, in this blog, we will discuss some common causes and fixes for “Wi-Fi Issues After Upgrading to Creators Update” problem.

Is Your PC Running Slow & Needs Optimization?
Don't Miss The BEST TOOL To FIX PC Errors & Issues

 

Common Causes of No Wi-Fi issues are

  1. Hardware Malfunctioning
  2. Faulty Network configuration
  3. Outdated Wireless network card drivers
  4. Damaged WiFi router
  5. Network account

Along with above discussed causes there are many other reasons available that can affect Windows 10 WiFi connection.

 

Also Read: Step by Step Guide to Fix Wi-Fi Connection Error “No Internet, Secured”

 

How to Fix Wi-Fi Issues After Upgrading to Creators Update?

Simply follow the below given fixes and make your system Wi-Fi enabled

 

Network Adapter troubleshooter

  1. Go to the Settings.
  2. Click on the Update & security and then on Troubleshoot.
  3. Choose Network Adapter, and click Run the troubleshooter.
  4. Select what type of network adapter you want to troubleshoot, in this case Wi-Fi.
  5. Click on the Next to begin the process.

Windows troubleshooter will automatically find and fix the Wi-Fi problem on your system/Laptop.

 

Reset a Wi-Fi adapter

With the help of Windows 10’s inbuilt tool, you can do uninstall/install all your network adapters.

It also allows to resets all the networking components to its default settings.

This will help to fix slow internet speed or Wi-Fi Issues After Upgrading to Creators Update.

 

Reset your Wi-Fi adapter:

  1. Go to the Settings and click on Network & Internet.
  2. Click on the Status and then click Network reset link and then click on the Reset now button.
  3. Select Yes to confirm and after it Close and reboot your computer.

Also Participate in Microsoft’s Discussion on WiFi issue, visit: https://answers.microsoft.com/en-us/windows/forum/windows_10-networking/wifi-issues-with-creators-update/4a20ba4f-33dc-4397-9823-e12dcb2607ba

 

Disabling the Power Management

By disabling some specific option in Power Management of Device Manager one can provide more power for the network card on their computer or laptop.

  1. Right-click the Start button and choose the Device Manager.
  2. Click on the Network adapters to expand its entry.
  3. Go to your wireless network adapter and click on it.
  4. Choose Properties.
  5. Select the Power Management tab.
  6. Uncheck the “Allow the computer to turn off this device” to save power and Click OK.

 

Turn on the Wireless Network Adapter

Step 1: Press the Windows + X button together and choose the Network Connections.

Step 2: Now, right click on the wireless network adapter with a red cross and choose to Enable if it is disabled.

Step 3: Choose the Diagnose from the right-click pane.

You will see that, Windows will diagnose the wireless issue, simply follow the on-screen instructions to complete this diagnosis problem.

 

Reset TCP/IP

Open the Command Prompt (Admin) and run the following commands one by one by pressing the Enter key after each one

netsh int ip reset

netsh int tcp set heuristics disabled

netsh int tcp set global autotuninglevel=disabled

netsh int tcp set global rss=enabled

At last, restart your computer and check for the Wi-Fi issue.

 

Registry Fix for No WiFi Issue after Windows 10 Creators Update

Note: Before applying this solution, make sure that you have enough knowledge to work over Windows registry database. A small mistake can turn your working system into a dead one.

Step 1: Open the command prompt with admin rights, to do this, press the Windows + X button and select Command Prompt (admin).

Step 2: In the command prompt, type the following command and press the Enter key.

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

Step 3: Again run the following command

netcfg -v -u dni_dne

Step 4: At last, reboot the computer.

 

Update a Wi-Fi adapter driver

Outdated drivers can generate this type of situation,

if you are unable to connect to the internet with your Windows 10 system…..

…then you need to make sure that adapter driver is updated or not.

In order to update this driver you need to download and install the latest driver from the network adapter manufacturer’s support website.

OR

If you want to do this task automatically then you need a professional driver updater tool.

This tool will allow you to deal with all types of driver issues related to Windows 10.

Instead of calling any professional simply apply this software and easily update all kinds of system drivers.

Summary
How to Repair Wi-Fi Issues After Upgrading to the Windows 10 Creators Update?
Article Name
How to Repair Wi-Fi Issues After Upgrading to the Windows 10 Creators Update?
Description
Apply some simple tricks and fix wi-fi issue...Step 1: Go to the Settings...Step 2: Click on the Update & security...Step 3: Click on Troubleshoot.
Author
Publisher Name
FIX PC ERRORS
Publisher Logo
  •  
    19
    Shares
  • 19
  •  
  •  
  •  
  •  
  •  
  •  
, , ,