[Complete Tutorial] How to Easily Fix any DLL Errors in Windows 10, 8.1 and Windows 8?

DLL Errors in Windows 10

Is your Windows Computer or Laptop throwing any type of DLL Error Message?

Or

Are you unable to run any app or play games due to the DLL error?

Is Your PC Running Slow & Needs Optimization?
Don't Miss The BEST TOOL To FIX PC Errors & Issues

Or

Receiving the DLL error message while booting your Windows 8 and 8.1 computer?

Or

Does your PC freeze-up and response very slowly?

If you are suffering from any of the above-discussed scenarios or getting any other DLL error while operating your computer/Laptop then you are at the right place. Today we will discuss over the several DLL issue, its causes and how to fix them. But, before fixing this issue, we will talk about some hidden facts of the DLL file, so let’s start

 

What Is a DLL error?

DLL files are one of the important system file, every single DLL file plays an important role. A .dll file is shared by more than one application software, hence corruption of a single dll file may affect all the applications related with it.

All the DLL files are responsible to makes the Windows system more efficient and boost your operating system by reusing the same code or files to run many features through lots of applications.

There are many types of DLL errors that may appear on the Windows system, some of the common error messages are as follows:

  • dll Error
  • dll Error
  • dll Error
  • dll Error
  • dll Error
  • dll Error
  • MSVCP140, MSVCP120, MSVCP110, and MSVCP100
  • MSVCR100, MSVCR71
  • VCRUNTIME140
  • D3DX9_43
  • Lame_enc
  • NTDLL
  • ” The .dll file is missing.”
  • “.dll file not found.”
  • “This application failed to start, an important component .dll is missing. Reinstalling the application may fix the error.”
  • “.dll not found.”
  • “.dll file Access Violation.”
  • “Cannot register .dll file”
  • “Cannot find C:\Windows\System32\\.dll.”

 

Causes of DLL Errors

  • Recently installed applications that replaced up-to-date DLL files with a preceding version
  • Hardware malfunctioning or defective hardware that can damage files
  • System files gets infected from malicious adware, spyware, malware and/or computer viruses
  • Deletion of a DLL file accidentally
  • Overwriting an important DLL file
  • DLL file gets contaminated or crashed
  • Misplaced, corrupted and inaccessible dll files
  • Registry overloaded with invalid key entries
  • Disk fragmentation

 

5 Workings Ways to Prevent DLL Errors on Windows System

By applying some tricks we can avoid any kind of DLL errors and prevent our system from errors with ease.

Method 1: Always avoid downloading free software and never download anything from an unknown or unreliable source. This is because, whenever a user downloads any freeware software such as video converter, free antivirus tool etc. then along with the downloaded file malware will also get downloaded and affect the system files.

Method 2: Don’t run more than one similar program at once, for example- you might need to exit from Image editor software before opening another one. Because many of them are using the same DLL registry files to run the specific functions.

Method 3: Stop the background processes using the Task Manager, because simply exiting from the program window doesn’t stop running it completely. To do this, press the CTRL+ALT+DEL from your keyboard and then follow the given steps:

After opening the task manager, go to the “processes” tab and then highlight an entry that you want to stop. After it hit the “end process” button and confirm to “end process.”

Method 4: It is recommended to Install or Uninstall any software/services properly. If you want to avoid any kind of DLL misplacing or overwritten situation then always go with custom installation/un-installation instead express method.

Method 5: Cleaning the registry junk is also important as the registry keys are directly related to the DLL files, hence a small issue on the registry database may affect the DLL file and you will start getting the DLL errors.

 

Some other DLL Errors and their Fixes:

Top 5 Solutions to Fix d3dx9_43.dll Missing Error in Windows 7, 8, 8.1 and 10

[Solved] “The program can’t start because vcruntime140 dll is Missing from your Computer”

[Solved] How to Fix MSVCR120.dll Missing Error on Windows 7, 8, 8.1 and Windows 10 Systems?

[Solved] Why I’m Getting MSVCP140.dll is Missing Error Message on Windows 10?

 

How Do I Fix a DLL Error in Windows 8.1, 8?

Now coming to the main point, how to fix any types of DLL error on Windows 8.1, 8 and Windows 10 system. It is little tricky to get rid of DLL Error manually, so it is suggested that if you don’t have much knowledge to run the given manual solutions then kindly go with an automatic DLL Repair Tool. Via this software, you can remove DLL issues automatically.

But, if you have sufficient knowledge to run the manual solution then go with the below-given methods one by one.

 

Solution 1: First clear Your Registry

The registry is a key module of the all Windows operating system, it is actually the main database and without it, we can’t imagine any working Windows system. The registry records and stores all information and settings for the hardware, software, users, and preferences on your PC. All the modifications executed by the user side such as the change in the settings of the Control Panel, files or installed software.

But after some months, the Registry gets overstuffed and it accumulates old, useless and incorrect records because of incomplete installations/uninstallation, application errors, configuration conflicts etc. And due to this, PC becomes slow.

To remove these unwanted and useless registry keys you have to remove them by using any professionally designed registry removal tool and delete them. Manual method to remove registry file is very difficult and dangerous for any PC because a small mistake during the removal process can harm your system and make it corrupt.

 

Solution 2: Re-Register the Contaminated DLL File

In order to re-register a dll file, you need to follow the given steps very carefully as a single mistake while executing these steps may affect your system more badly.

To do this first you have to note down the name of dll error that your system is throwing. After copying the name of DLL file proceed to the below steps:

Open the Command Prompt with admin privilege, to do this, press the Windows + X then select Command prompt (admin)

Then run the below-written commands one by one. Type the first command and press the Enter key and then do the same for the second command.

regsvr32 /u FILENAME.dllregsvr32 FILENAME.dll

 

Solution 3: Do System Restore

Restoring your system is very simple. By System Restore process you can take your computer back in time to solve the problem. Follow the given steps carefully:

Go to the search option and search for the control panel then select the control panel from the search result.

Select the Recovery and then Open System Restore.

Simply, follow the onscreen instructions to select a restore time and allow Windows to complete the process.

 

Solution 4: Run SFC to Fix the Damaged System Files

Go with the built-in Windows SFC (system file checker) utility and repair all the damaged system files with ease.

Using Windows install disc

Insert your Windows installation Disc and boot from it

Then, follow the on-screen instruction: choose language, time and keyboard input then click on the Repair your computer.

Choose the Windows installation drive, generally present at the C:\, and click on the Next

Select the Command Prompt from the System Recovery Options box

Type the following command and then hit the Enter key:

sfc /scannow /offbootdir=D:\ /offwindir=D:\Windows\

Note: Here you have to replace the D: with the letter of the drive letter where Windows Operating System is installed.

 

Using the Command Prompt

Open the Command Prompt by pressing the Windows + X then selecting the Command prompt (admin)

Then run the given command and press the Enter key.

sfc /scannow

 

Solution 5: Check the hard drive errors using CHKDSK utility

A problematic hard drive may also trigger this type of error because sometimes its file integrity compromised due to several internal and external problems.

In order to solve this issue, you can go with a built-in Windows CHKDSK utility. Follow the given steps carefully to run chkdsk command.

Insert your Windows installation Disc and boot from it

Then, follow the on-screen instruction: choose language, time and keyboard input then click on the Repair your computer.

Choose the Windows installation drive, generally present at the C:\, and click on the Next

Select the Command Prompt from the System Recovery Options box

Write the following command and then hit the Enter key

chkdsk C: /f

 

Automatic DLL Repair Tool

In order to repair any types of DLL Errors on Windows 8.1 or 8, you have to download DLL Repair Tool. This tool is compatible with the Windows 8.1, 8 and Windows 10.

This is the only repair tool that able to make your Windows system error free. This tool is programmed and designed by the group of professionals and it can also fix any type of other system errors without affecting your computer and its installed applications.

This tool is an Easy to use; its user interface is cleverly designed that contain lots of graphical signs that making this tool more understandable. This tool doesn’t need any professional or programming knowledge to operate, as it designed for everyone.

If you are a new user and want to fix such error then this tool is especially for you, simply run this tool to get rid of Windows system errors which include DLL errors, driver issues, registry errors and more.

After running this tool, your system will become like a new computer because and you will see that the performance of your PC gets improved. Hence, it is recommended to try it once.

Follow 3 Simple Steps to Repair PC Instantly!

Step 1 – Download & Install PC Repair Tool.

Step 2 – Click “Scan” button to diagnose the PC.

Step 3 – Click “Fix Errors” to the fix the issues and you are done.

(Note: This powerful tool can increase your performance by 97%)

Summary
[Complete Tutorial] How to Easily Fix any DLL Errors in Windows 10, 8.1 and Windows 8?
Article Name
[Complete Tutorial] How to Easily Fix any DLL Errors in Windows 10, 8.1 and Windows 8?
Description
Fix DLL error and make your Windows 10, 8 and 8.1 system error free and fast. Follow the given tricks to get rid of DLL error and other windows errors.
Author
Publisher Name
FIX PC ERRORS
Publisher Logo
  •  
    20
    Shares
  • 18
  •  
  •  
  • 2
  •  
  •  
  •  
, , , , ,